Figure display tips: shelves, cases and lighting
How to pick a cabinet, light it without heat or UV, and arrange your figures so each one gets seen. Plus a few tricks for a safer, better looking shelf.
· 5 min read

A good display does 2 jobs. It shows off your figures, and it protects them from dust, light and knocks. You do not need an expensive setup to get both. This guide covers the choices that matter most, from the case itself to the light above it and the putty under each base.
Glass cabinet, open shelf or acrylic case
Each option has a clear trade-off.
- Glass cabinets keep most dust out and protect figures from bumps and pets. Glass resists scratches and stays clear for years. The downside is weight, cost and, in some models, fixed shelf heights.
- Open shelves are cheap and easy to rearrange, and nothing sits between you and the figure. They collect dust fast, so plan on gentle dusting with a soft brush every week or 2.
- Acrylic cases hold a single figure or a small group. They are light and work well for a centerpiece or a fragile GK resin statue. Acrylic scratches easily, so clean it with a microfiber cloth and plain water, never with paper towels or alcohol.
Many collectors mix them: a glass cabinet for the main collection and 1 or 2 acrylic cases for the pieces they want to stand alone.
Plan shelf depth and height
Measure before you buy. Most prize figures stand about 15-25 cm tall. A 1/7 scale figure of an average-height character is about 23-24 cm, and a 1/4 scale figure is often 40 cm or more. Bases, wings, weapons and hair effects add to that.
- Leave at least 5 cm of air above the tallest figure on each shelf, so you can lift it out without hitting the top.
- A shelf depth of 30-40 cm lets you stand 2 rows. Shallower shelves of about 20 cm work for a single row of prize figures.
- Adjustable shelves are worth it. Your collection will change, and fixed heights waste space.
Use risers and steps
With 2 rows, the back row hides behind the front one. Clear acrylic risers or steps fix this. Put taller figures at the back on a riser and shorter ones in front. Clear risers almost vanish, in photos and in person, while black or white ones become part of the look. Keep the heaviest pieces low and on the most stable surface.
Light with LEDs, not heat or sunlight
Light is the biggest long-term risk to painted PVC and resin. UV light fades paint and can yellow clear or white parts. Heat can soften PVC over time and make a figure lean.
LED strips and puck lights solve most of this. They run cool and give off almost no UV, unlike halogen bulbs and direct sunlight. Look for these points:
- Color temperature: about 4000-5000 K gives neutral, true-to-life colors. 2700-3000 K looks warm and cozy but turns whites yellow. 6000 K and above can look cold and blue.
- A high color rendering index (CRI 90 or above) shows paint colors more accurately.
- Light from the front and top, not only from behind. Back lighting alone leaves faces in shadow.
- Use a timer or a smart plug so the lights are not on all day.
Cool light, a steady room temperature and a little putty protect a figure better than any expensive cabinet.
Keep away from windows and heaters
Even through glass, sunlight carries enough UV to fade a figure over months. Place the display on a wall that gets no direct sun, or keep the blinds down. Keep it away from radiators, heaters and air vents too. Heat and dry air speed up warping and can loosen glued joints. A room with a steady temperature is the best home for a collection.
Group, space and set the backdrop
A shelf looks calm when it follows a rule. Group by series, so the ONE PIECE crew stands together, or by scale, so figures look right next to each other. A 1/4 scale figure beside a small prize figure makes both look odd.
Leave space. A crowded shelf hides poses and makes it easy to knock something over when you reach in. A gap of a few centimeters around each figure lets every piece stand on its own.
The back wall matters more than you think. A plain neutral or dark backdrop makes colors pop. Mirror backs double the light and show the back of each figure, but they also show cables and clutter, so keep things tidy.
Secure figures against vibration
Doors, footsteps, pets and earthquakes all make shelves shake. A figure that slowly walks to the edge will fall. Museum putty or museum gel under the base holds it in place and usually comes off cleanly. Use a small amount, test it on a hidden spot first, and peel it off slowly. Gel suits glass, putty suits wood and plastic. Also make sure tall cabinets are anchored to the wall.
Photograph your shelf
A good shelf photo is easy with a phone.
- Clean the glass and dust the figures first.
- Turn off the room lights and use only the display lighting, so the colors do not mix.
- Shoot at a slight angle to the glass, or open the door, to avoid reflections.
- Rest the phone on something stable and use the timer, so the shot stays sharp.
- Tap to focus on a face, then lower the exposure a little so bright parts keep their detail.
Take a photo every few months. It shows how the collection grows, and it helps you spot fading or leaning early.
GachaBay team
Figure specialists
We are a small shop that only sells anime figures. We write these guides from the questions collectors send us most.



